Canon VB-R13VE Manual
Setting Page
5
139
Reduces the size of transmitted H.264 video by reducing the video quality of non-target areas, such as ceilings and the sky.
ADSR is an abbreviation for Area-specific Data Size Reduction.
Note
• The image quality of the specified area depends on the [Bit Rate Control] setting in [Video] > [H.264(1)] or [H.264(2)].
– When [Use bit rate control] is set: The image quality is adjusted according to the situation to match the target bit rate.
– When [Do not use bit rate control] is set: The setting in [Video] > [H.264(1)] or [H.264(2)] is retained.
– When [Do not use bit rate control] is set: The setting in [Video] > [H.264(1)] or [H.264(2)] is retained.
• The image quality for areas outside the specified area will be reduced according to [Data Size Reduction Level].
• Even if the camera pans, tilts, or zooms, the specified area follows the movement of the camera.
• Specified areas can only be configured within view restrictions.
Specified Area
Specify the area where video quality is not to be lowered.
You can specify up to eight areas with different colored frames.
[Video and Audio] > [ADSR]
Reducing Data Size by Lowering Video Quality in Specific
Areas
Reducing Data Size by Lowering Video Quality in Specific
Areas
Important
Some image scenes and settings for selected areas may not be able to reduce data size using ADSR. Please test the ADSR feature in the
environment before use.
environment before use.
The following settings can be configured here.
• Specified Area
• ADSR
R13 R12 M50