Canon VB-R13VE Manual
168
[Video Record]
Select whether to record video depending on the timer event.
Select whether to record video depending on the timer event.
If you select [Enable] and a timer event is triggered, video will be transmitted to the recording destination specified in
[Video Record] > [Upload] > [Video Record Action] (P. 156).
[E-mail Notification]
When [24-Hour Continuous Setting] is set to [Disable], select whether to send an e-mail notification depending on the timer
When [24-Hour Continuous Setting] is set to [Disable], select whether to send an e-mail notification depending on the timer
event.
If [Enable] is selected, e-mail notification is performed when a timer event is triggered.
To use e-mail notification, you must set [Video Record] > [E-mail Notification] (P. 160) beforehand.
[External Device Output]
When [24-Hour Continuous Setting] is set to [Disable], set whether external device output (1 or 2) is active or inactive at
When [24-Hour Continuous Setting] is set to [Disable], set whether external device output (1 or 2) is active or inactive at
[Start Time] and [End Time] of a timer.
[Repeat Interval] is not supported.
[Switch Day/Night]
When [24-Hour Continuous Setting] is set to [Disable], select the Day/Night Mode switching behavior when a timer event is
triggered. This can only be set with [Timer 1].
Select [Switch to Day Mode] to switch to Day Mode at the start time, and Night Mode at the end time.
Select [Switch to Night Mode] to switch to Night Mode at the start time, and Day Mode at the end time.
[Repeat Interval] is not supported.
Important
• If you set [Start Time] and [End Time] and select a preset with [Start Time Preset], the Day/Night setting in [Camera] > [Preset] >
[Camera Settings] > [Day/Night] (P. 131) is given priority. Therefore, even if you set [Switch Day/Night] to [Switch to Day Mode] or
[Switch to Night Mode], the [Switch Day/Night] setting will be disabled if the opposite setting has been configured in [Preset] >
[Camera Settings].
[Switch to Night Mode], the [Switch Day/Night] setting will be disabled if the opposite setting has been configured in [Preset] >
[Camera Settings].
• When [Day/Night] in [Camera] > [Initial Setting] is set to [Auto] (P. 118), [Switch Day/Night] will not happen when a timer event is
triggered.
• When the [Switch Day/Night] settings switch Day/Night Mode, camera control privileges are released, even if the user has obtained
those camera control privileges using the Camera Viewer or other camera control applications.
R13 M50 H652 H651
R13 R12 M50