Canon VB-R13VE Manual
188
Note
A ratio of up to 30% can be set in [Object Size (%)] for passing detection.
Detection Status for Passing Detection
All moving objects detected are shown with white profile lines.
When the [Decision Point] of a moving object that meets the [Object Size (%)] setting crosses a detection line in the
direction specified in [Passing Direction], the profile line changes to the same color as the detection line, and the
status becomes “detected”.
Notification of a passing detection event occurs only when the decision line is crossed. Take care in setting the
operation to be performed when an event occurs.
How to Configure Intrusion Detection
Set the area for which you want to detect intrusions.
The decision point is indicated by a cross on the detection frame of the moving object.
Important
Perform a detection test after configuring passing detection to make sure the detection frame of a moving object continues to be
displayed.
displayed.
Object Size Indicator
1
In the video display area, draw the area in which you would like to detect intruding objects (P. 180).
2
Configure [Duration (Sec)] for the time required for an object to enter a detection area, and be detected as an
intrusion.
intrusion.
3
In [Decision Point], select the point of a moving object that will be used for triggering intrusion detection when the
moving object enters a detection area.
moving object enters a detection area.