Canon VB-R13VE Manual

192

For Auto Tracking, set the detection area for moving objects while checking the video on the computer screen. The camera 

is controlled so that the detected moving object appears near the center of the video display area. You can also set which 

operations (such as e-mail notification, recording video, or playing audio from the speaker connected to the camera) are 

carried out when detection occurs.

Setting Auto Tracking

Use the following steps to set Auto Tracking.

For details on how to adjust presets, please refer to “Registering a Preset” (P. 131).

If you select [Specify the initial camera position], the camera angle will be moved to the selected preset position. 

The camera angle will also be moved to the selected preset position after Auto Tracking ends.

Note

You can select presets that meet the following conditions.

– Presets configured within the view restrictions.
– Presets with pan, tilt and zoom setting values (not blank) configured in [Preset Registration] (P. 132).

[Event] > [Intelligent Function]
- Auto Tracking -

R13 R12

The following settings can be configured here.

• Operation  Mode

• Display Options

• Camera Position Settings

Obtain camera control privileges to set Auto Tracking (P. 67).

Select [Specify the initial camera position] in [Camera Position Settings] as necessary, then select a preset.

Important

It is recommended that you select [Specify the initial camera position] and configure the camera to begin auto tracking from a 
specified position.