Canon VB-R13VE Manual
Setting Page
5
97
[IPv4 Address Setting Method]
Select the method for setting the IPv4 address.
Select the method for setting the IPv4 address.
For [Manual], enter a fixed IPv4 address into [IPv4 Address].
For [Auto (DHCP)], the settings acquired from the DHCP server will be automatically entered in [IPv4 Address], [Subnet
Mask] and [IPv4 Default Gateway Address].
[IPv4 Address]
When [IPv4 Address Setting Method] is set to [Manual], enter a fixed IPv4 address.
When [IPv4 Address Setting Method] is set to [Manual], enter a fixed IPv4 address.
The IP address cannot start with 127., such as 127.0.0.1.
[Subnet Mask]
When [IPv4 Address Setting Method] is set to [Manual], enter the designated subnet mask values for each network.
[IPv4 Default Gateway Address]
When [IPv4 Address Setting Method] is set to [Manual], enter a default gateway IP address. Be sure to set this when
connecting the camera to a different subnet from that of the Viewer.
[AutoIP]
Select this to enable or disable AutoIP.
Select this to enable or disable AutoIP.
[IPv4 Address (AutoIP)]
When [AutoIP] is set to [Enable], an automatically set IPv4 address is displayed.
When [AutoIP] is set to [Enable], an automatically set IPv4 address is displayed.
IPv6
Settings for using IPv6 to connect to the camera. The IPv6 address can be assigned by the RA or DHCPv6 server
automatically or set manually.
[IPv6]
Select this to enable or disable IPv6.
Select this to enable or disable IPv6.
[Auto (RA)]
Select [Enable] to set an address automatically using RA (Router Advertisement, network information automatically
Select [Enable] to set an address automatically using RA (Router Advertisement, network information automatically
transmitted from a router).
[Auto (DHCPv6)]
Select [Enable] to use DHCPv6 to set an address automatically.
[IPv6 Address (Manual)]
Enter a fixed IPv6 address if you set the address manually.
[Prefix Length]
Enter a prefix length if [Disable] is specified in [Auto (RA)].
Important
• Contact your System Administrator for the [IPv4 Address], [Subnet Mask] and [IPv4 Default Gateway Address] if you set the IPv4
address manually.
• If any of the [IPv4 Address], [Subnet Mask] or [IPv4 Default Gateway Address] settings are wrong, the camera may become
inaccessible via the network. If this occurs, use the Camera Management Tool to reset the address (P. 40).
Important
If [Auto (DHCP)] is selected as the IPv4 address setting method, the IPv4 address may not be assigned correctly in certain environments,
such as when a router is present between the DHCP server and the camera. If this occurs, select [Manual] and enter a fixed IPv4
address.
such as when a router is present between the DHCP server and the camera. If this occurs, select [Manual] and enter a fixed IPv4
address.
Important
Contact your System Administrator for the [IPv6 Address], [Prefix Length] and [IPv6 Default Gateway Address] if you set the IPv6 address
manually.
manually.