Canon Speedlite 430EX II Manual
19
You can set the flash output from 1/64 power to 1/1 full power in 1/3-
stop increments.
Use a hand-held flash meter to determine the required flash output to
obtain a correct flash exposure. Setting the camera’s shooting mode to
<W> or <q> is recommended.
stop increments.
Use a hand-held flash meter to determine the required flash output to
obtain a correct flash exposure. Setting the camera’s shooting mode to
<W> or <q> is recommended.
1
Press the <D> button so
that <q> is displayed.
that <q> is displayed.
2
Set the flash output.
Press the <8> button.
X
The flash output blinks.
Press the <9> button to set the
flash output, then press the <8>
button.
flash output, then press the <8>
button.
Press the shutter button halfway to
see the effective flash range
displayed.
see the effective flash range
displayed.
The manual flash output value will change as shown below when the
flash output is decreased or increased.
flash output is decreased or increased.
q: Manual Flash
Flash Output Display
(Example)
Figures for decreased flash output
→
1/1
1/1 -0.3
1/1 -0.7
1/2
1/2 -0.3
1/2 -0.7
1/4
•••
1/2 +0.7
1/2 +0.3
1/4 +0.7
1/4 +0.3
•••
← Figures for increased flash output
A81_02.fm Page 19 Thursday, February 14, 2008 11:37 AM