Canon Speedlite Transmitter ST-E3-RT Manual

28

Using Fully Automatic Wireless Flash

You can take three shots while automatically changing the flash output. 
This is called FEB (Flash Exposure Bracketing). The settable range is 
up to ±3 stops in 1/3-stop increments.

M>.

 

Press function button 4 to display 
<

M>.

E> button.

 

Press function button 3 <

E>.

X

<

g> is displayed and the FEB level 

display is highlighted.

 

Turn <

9> to set the FEB level, and 

press <

8>.

X

The FEB level is set.

 

“0.3” indicates 1/3 stops and “0.7” 
indicates 2/3 stops.

 

When used together with flash exposure 
compensation, FEB shooting is 
performed based on the flash exposure 
compensation amount.

g FEB

 

After the three shots are taken, FEB is canceled automatically.

 

Before shooting with FEB, it is recommended to set the camera’s drive 
mode to single shooting and check that the flash is recycled.

 

You can use FEB together with flash exposure compensation or FE lock.

 

If the camera’s exposure compensation is set to 1/2-stop increments, flash 
exposure compensation will be up to ±3 stops in 1/2-stop increments.

 

You can set FEB to remain enabled automatically after shooting the three 
shots (C.Fn-03/p.56).

 

You can change the FEB shooting sequence (C.Fn-04/p.56).

COP

Y