Canon VB-C500VD Operating Guide

1-7

etailed Settings

Setting the Administrator Password, LAN, IPv6,
DNS, etc. (Network)

Administrator Password

(1) [Password]

Set the Administrator password. You can use up to eight (single-byte) ASCII characters

(space or printable characters). The factory setting is "camera." If Admin Viewer or VBAdmin

Tools is connected, disconnect the applicable item before changing the password.

(2) [Confirm Password]

Enter the same password for confirmation.

You can set the following items.

z Administrator Password

Set the Administrator password.

z LAN

Set the IP address and other items needed to establish LAN connection.

z IPv6

Set IPv6.

z DNS

Set the name server address, host name and DDNS.

z SNMP

Set the SNMP.

Note

z Be sure to change the default Administrator password to ensure security of the system.

Don't forget the new password.

z If you have forgotten the Administrator password, press the reset switch to initialize the

P. 5-21). Take note,

however, that this will reset all settings of the camera, except for time and date, to

their factory settings.

COP