Canon VB-R13VE Manual

amera Maintenan

Click [Browse] and then specify the firmware file in the dialog box that appears.

Note

You can copy and paste the path of the [File Name]. Copy the target by pressing the Ctrl+C keys, and paste by selecting the
destination row and pressing the Ctrl+V keys. You can select multiple copy destinations by holding the Ctrl key while clicking.

If you select [Restore], all user settings except the following will be erased and restored to the factory default

settings after the firmware is updated.

• Administrator account

• Network settings

• Time zone

• Certificate

• Secret key

To keep the current settings of the cameras, select [Do Not Restore] for [Initial Settings].

Enter the time to wait for a response from the camera before transferring the firmware. The firmware is not

updated for cameras that do not respond within the time entered here due to a slow network speed, etc. In this

case, specify a longer waiting time and then execute the operation again.

Updating of the firmware begins.

During update, a progress bar appears in the [Message] field. If you are performing a firmware update, and the

update fails for some cameras, the message is displayed. Confirm the message displayed in the [Message] field.

Note

You can stop the firmware update part way through by clicking [Stop]. However, the process cannot be canceled for cameras that
have entered the restarting stage.

Specify the firmware file.

To restore the cameras to the default settings when updating the firmware, select [Restore] for [Initial Settings].

If necessary, specify [Network Timeout] in seconds (30 – 36,000 seconds).

Click [Start].