Canon VB-H710F Manual

Performing Operations and Settings in the Admin Viewer

139

min Viewer/

iewer

Opening/Closing Control Items

Clicking the title of a control item will open or close it.

You can open the various control items even without
obtaining the camera control privileges, but all items other
than [Frame Rate] will be grayed out.

Performing Operations and Settings

Click the camera control buttons to set the pan, tilt and

zoom operations as well as the speed.

(1) [Pan/Tilt] button

Move pan and tilt in the direction of the arrows.

Operation will continue as long as you are holding

down the button and will stop when you release it.

Clicking the center button will make the camera face

straight forwards.

(2) [Zoom] button

Zooms in or out. Operation will continue as long as

you are holding down the button and will stop when

you release it.

(3) [Pan/Tilt] Speed

Select a speed from [Fast], [Normal] and [Slow].

(4) [Zoom] Speed

Set the speed to [Fast] or [Slow].

Note

Changing the [Pan/Tilt] speed or [Zoom] speed will not change

the speed of the slider, or of the pan, tilt or zoom in panorama.

Setting the Smart Shade Control

The smart shade control function differs from backlight

compensation in that only dark areas are brightened while

bright areas are kept intact.

(1) [Smart Shade Control]

Set to [Off] or [On].

(2) Adjusting the Smart Shade Control

When smart shade control is [On], set one of the 7

levels from [1] (Mild) to [7] (Strong).

Example: If the background is bright and the subject

is hard to see, this function brightens dark areas to

make the subject clearer.

In comparison to backlight compensation, smart

shade control can reduce overexposure of bright

areas.

Note

• When [On] is selected for smart shade control, the image file

size increases.

• When [On] is selected for smart shade control, screen noise

may increase. If noise is noticeable, lower the control level.

Setting the Focus

[Auto]

: Automatically focuses on the

subject.

[Manual]

: You can adjust the focus manually

by pushing the

(far) and

(near) buttons.

Clicking [One-shot AF] will use

autofocus to focus on a subject and

then stop in manual focus.

⇔

(1)

(2)

(3)

(4)

(1)

(2)

OFF

Smart Shade

Control

BLC (Back Light

Compensation)