Canon VB-R13VE Manual

Note

When [Clear IR Mode] is set to [On], both the displayed and recorded video will be black and white.

(6)

[Aperture Mode]

Specify the camera aperture mode.

[Night Mode]

• [Disabled]

Disable the Night Mode function.

• [Enabled]

Record in Night Mode.

• [Auto]

The camera automatically decides when to switch to Night Mode. When recording ends, the Night Mode

setting returns to the value before recording started.

Note

When [Night Mode] is enabled in [Aperture Mode], both the recorded and displayed video is in black and white.

(7)

[Infrared]
Specify whether or not to use infrared lighting during night mode. Cameras without the infrared lighting feature

will always be set to [Not supported].

[Off]: Record with infrared lighting disabled.

[Day/Night Operation]: Use infrared lighting together with night mode. Infrared lighting will be irradiated during

night mode.

[1] to [5]: Select one of five strength levels for the infrared lighting used during night mode when [Exposure] is

set to [Manual].

(8)

[White Balance]

Specify the appropriate white balance by selecting one of the camera’s light source settings displayed in the list.

If [Manual] is selected, use one of the following two methods to adjust the white balance.

• [R Gain] and [B Gain]

Specify the white balance parameters by dragging the sliders. Drag to the right to increase the gain (the

sensitivity to brightness).

• [One Shot WB]

Force white balance adjustment to a light source. Using a white object (such as a piece of white paper) as a

standard, fill the shot with the object and click this button.

It may take approximately 30 sec. for [Exposure], [Night Mode] and [White Balance] settings to be reflected in the

view after recording starts.

Important

When [Clear IR Mode] is set to [On], [Night Mode] cannot be specified.

Important

When [Clear IR Mode] is set to [On], [Infrared] cannot be specified.

Important

When [Clear IR Mode] is set to [On] or when [Night Mode] is set to [Enabled], the white balance cannot be specified.
If you select [Auto] for Night Mode, however, you will be able to set the white balance, but the settings will be cleared when the
camera switches to Night Mode.

C300 C50F C50i