Canon VB-R13VE Manual
14
Start this utility on your PC, and display the list of videos saved on the memory card mounted in the camera.
Starting this Utility
When you install this utility, the icon is displayed on the desktop. Click the icon to start this utility.
Note
To use this utility on computers where Windows Firewall is enabled, you may need to register it as an application allowed to communicate
through the firewall. If this utility is not registered as an approved application, it will be blocked by the firewall when started, but it can still
be started by clicking [Yes] in the dialog box that is displayed.
through the firewall. If this utility is not registered as an approved application, it will be blocked by the firewall when started, but it can still
be started by clicking [Yes] in the dialog box that is displayed.
Launches this utility.
Connection settings
(1)
[Host Name]
Enter the host name or IP address of the camera.
(2)
[Enable SSL Communications]
Select this to connect to the camera using SSL communication.
(3)
[Port]
Enter the port number of the camera. Use the default value normally.
(4)
[Administrator Name]
Enter the administrator name for the camera.
(5)
[Password]
Enter the administrator password for the camera.
Launching the Recorded Video Utility
Important
You cannot start this utility while creating a panorama image on the camera. In addition, creating a panorama image (or in other cases
where the camera is accessed) while operating this utility causes you to exit this utility.
where the camera is accessed) while operating this utility causes you to exit this utility.
1
Double-click the [Recorded Video Utility] icon on the desktop.
2
Enter the information of the connected camera.
(1)
(2)
(3)
(4)
(5)
(6)
(7)