Canon imagePROGRAF iPF685 Manual
Item
Details
Default Setting
Use RARP
Activate this setting to use RARP for configuring the IP address.
Off
Enable DNS Dynamic
Update
Update
Activate this setting to perform DNS server registration automatically.
Off
Use Zeroconf Func-
tion
tion
Activate this setting to use Bonjour.
On
IP Address
Specify the printer's IP address.
0.0.0.0
Subnet Mask
Specify the printer's subnet mask.
0.0.0.0
Gateway Address
Specify the printer's default gateway.
0.0.0.0
LPD Printing
Activate this setting to use LDP Printing.
On
IPP Printing
Activate this setting to use IPP Printing.
On
IPP Printer URI
Specify the URI of the printer used for IPP printing using up to 252 charac-
ters.
ters.
printer
RAW Printing
Activate this setting to use Raw Printing.
On
RAW Mode Bi-direc-
tion
tion
Activate this setting to use Raw mode bidirectional communication.
Off
FTP Printing
Activate this setting to use FTP Printing.
On
Use Discovery
Activate this setting to use SLP Discovery function.
On
Scope
Enter the SLP search range.
default
SMTP Server Address
Specify the SMTP server's IP address.
You can also specify the SMTP server domain name, if desired.
You can also specify the SMTP server domain name, if desired.
0.0.0.0
Primary DNS Server
Address
Address
Specify the IP address of the primary DNS server.
0.0.0.0
Secondary DNS Serv-
er Address
er Address
Specify the IP address of the secondary DNS server.
0.0.0.0
DNS Host Name
Specify the printer host name, up to 63 characters (1–63 characters). Use sin-
gle-byte letters, numbers, and - (hyphens). Do not use numbers or - for the
first character or - for the last character.
gle-byte letters, numbers, and - (hyphens). Do not use numbers or - for the
first character or - for the last character.
NB-18GBipxxxxxx
DNS Domain Name
Specify the printer domain name, up to 63 characters. Use single-byte letters,
numbers, - (hyphens), and . (periods). Do not use numbers, -, or . for the first
character, or - or . for the last character.
numbers, - (hyphens), and . (periods). Do not use numbers, -, or . for the first
character, or - or . for the last character.
blank
Multicast DNS Serv-
ice Name
ice Name
Specify the printer's Multicast DNS service name. (1–63 characters)
This name will be displayed when Bonjour functions are used.
This name will be displayed when Bonjour functions are used.
Canon iPFxxxx
(xxxxxx)
(xxxxxx)
6
Click OK to display the Network page.
Note
•
If you specify to configure the IP address using DHCP, BOOTP, or RARP, there must be a server that supports such
protocol running in the network.
protocol running in the network.
•
If you specify to configure the IP address using DHCP, BOOTP, or RARP, the IP address obtained by this method is
used first. If you cannot obtain the IP address, the address specified in IP Address is used.
used first. If you cannot obtain the IP address, the address specified in IP Address is used.
•
It takes up to two minutes to determine whether DHCP, BOOTP, or RARP are available. We recommend clearing check
boxes of options you will not use.
boxes of options you will not use.
•
If you are using a DNS server, select Enable DNS Dynamic Update and enter the IP Address for DNS servers and
DNS domain name in Primary DNS Server Address, Secondary DNS Server Address and DNS Domain Name,
respectively.
DNS domain name in Primary DNS Server Address, Secondary DNS Server Address and DNS Domain Name,
respectively.
iPF685
Configuring the Printer's TCP/IP Network Settings With RemoteUI
Network Setting
Initial Settings
501