Canon imagePROGRAF iPF685 Manual

Press ▲ or ▼ to select D, and then press the OK button.

Press ▲ or ▼ to select D-1, and then press the OK button.

 

Examine adjustment test pattern D-1 and determine the number with
straight lines.

Note

If two patterns seem equally good and you cannot decide which one is better, choose an intermediate value.
For example, choose 11 if you cannot decide whether pattern 10 or 12 is better.

Press ▲ or ▼ to select the pattern number you have decided, and then press the OK button.

Repeat steps 8–10 to specify the adjustment value for D-2 to D-17.
Note that D-6 and D-12 cannot be configured.

Press the Back button.

Press ▲ or ▼ to select Register Setting, and then press the OK button.

Press ▲ or ▼ to select Yes, and then press the OK button.
The adjustment value is now registered, and adjustment is complete.

If printed lines are misaligned, execute Head Inc. Adj. to adjust the angle of inclination of the Printhead. Executing
Head Inc. Adj. requires you to examine a printed test pattern and enter an adjustment value.

Paper to Prepare

Rolls

An unused roll at least 10 inches wide

Sheets One sheet of unused paper of at least A4/Letter size

Perform adjustment as follows.

Load the paper.

Note

When loading paper, specify the type of paper correctly. Using paper that you have not specified on the printer
may cause feeding problems and affect the printing quality.

We recommend loading a type of paper that you use often.

 

iPF685

                                                                                                                                                                                           

Adjusting Line Misalignment

                                                                                                                                                                                                                             

Adjustments for Better Print Quality

Adjusting the Printhead

577