Canon Wireless File Transmitter WFT-E6A Manual

23

 

Turn the <5> dial to select how to configure the 
network settings, and then press <0>.

 

Select [OK] and press <0> to go to the next 
screen.

 

Settings otherwise configured with [Manual setting] can be configured automatically. 
However, the IP address and similar settings must be automatically assigned and 
configured in environments using DHCP servers or wireless LAN terminals or routers 
supporting DHCP server functions.
If an error is displayed, select [Manual setting] regardless of whether the IP address and 
similar settings are automatically assigned and configured.

The [IP address set.] screen is displayed after you select 
[Manual setting]. If [Auto setting] results in an error, enter 
the IP address manually. As the IP address, enter the IP 
address assigned to the camera.
Enter the [IP address], [Subnet mask], [Gateway], and 
[DNS address] on each screen as they are displayed.
If you are not sure what to enter, refer to page 112, “Checking 
Network Settings,” or ask the network administrator or 
another person knowledgeable about the network.

 

When entering numbers for the IP address, subnet mask, 
and so on, press <0> to move the input position and 
turn the <5> dial to enter the number.