Canon Wireless File Transmitter WFT-E6A Manual
69
Arranging the Slave Cameras
Do not use multiple flash units. Although slight, there is a difference in the shutter release timing
which may cause out-of-sync flash firing and inadequate exposure.
which may cause out-of-sync flash firing and inadequate exposure.
Linked shooting is not possible when master and slave cameras are set to [Mirror lockup]
[Enable] or [Enable:Mirror down w/ s].
[Enable] or [Enable:Mirror down w/ s].
During linked shooting, when you press the AE lock or depth-of-field preview button, the camera
adjusts the focus and meters as if you had pressed the shutter button halfway.
adjusts the focus and meters as if you had pressed the shutter button halfway.
Once you have established a connection between the master camera and slave cameras, the
settings are retained even after you replace the batteries.
settings are retained even after you replace the batteries.
If you will no longer use a slave camera in linked shooting, set [Communication mode] to
[Disconnect] on that slave camera.
[Disconnect] on that slave camera.
Any cameras compatible with linked shooting, when they have WFT series transmitters attached,
can be used as slave cameras, regardless of model.
can be used as slave cameras, regardless of model.