Canon Macro Ring Lite MR-14EX Manual
10
Use four AA/R6 batteries.
1
Open the cover.
Slide the battery compartment cover
as shown by the arrow, then flip up
the edge.
as shown by the arrow, then flip up
the edge.
2
Insert the batteries.
Make sure the + and - battery
contacts are properly oriented as
shown in the compartment.
contacts are properly oriented as
shown in the compartment.
3
Close the cover.
Push down the cover and slide it
back.
back.
Recycling Time and Flash Count
Based on a new set of batteries and Canon’s testing standards.
The figures are the same for both flash tubes/heads firing or single tube/head
firing.
firing.
This applies to both the MR-14EX and MT-24EX.
Installing the Batteries
Battery Type
Recycling Time
Flash Count
AA/LR6 alkaline batteries
Approx. 0.1 - 7 sec.
Approx. 120 - 800
Note that certain AA/R6 lithium batteries may become extremely hot
in rare cases during usage. Due to safety reasons, do not use
“AA/R6 lithium batteries”.
in rare cases during usage. Due to safety reasons, do not use
“AA/R6 lithium batteries”.
Use a new set of four batteries of the same brand. When replacing the
batteries, replace all four at one time.
batteries, replace all four at one time.
MR14_MT24_01.fm Page 10 Monday, December 22, 2014 3:15 PM