ASUS Xonar DG SI User Manual

Page of 52
35
ASUS Xonar DG SI 
6.6 FlexBass
FlexBass, an advanced bass management and enhancement mechanism, allows 
you to select each satellite speaker’s type for optimal sound performance from the 
speakers. (Small: common speaker that cannot produce low frequencies; Large: 
wide-band speakers that can produce low frequencies well). It comes with an 
adjustable crossover frequency for the boundary of the bass signals. FlexBass will 
filter out the bass signals from small speaker channels and redirect them all to the 
subwoofer or Large speakers.
No Item
Description
1
On/Off
Click this switch to turn on or off all functions on this 
FlexBass page.
2
Small / Large speaker 
option
Select the speaker type that you connected. If your speaker 
type cannot perform low-frequency signals (bass), select 
“Small” speaker type and Xonar DG SI will filter out the bass 
signals and send them to the subwoofer channel. If those 
speakers are full-range, you can select the “Large” speaker 
type. 
Note: Usually, low-cost PC’s 2-channel speakers are  
small-type speakers. Refer to the speaker’s specification. 
If you have any questions, consult your speaker vendor. 
However, common 2.1 speakers with a subwoofer should 
be categorized as Large speakers because the subwoofer 
can redirect the bass signals inside the two channels to the 
subwoofer speaker automatically.
3
Picture for Small/
Large speaker
Colors for small/large speakers are different.
Orange: large speakers
Green: small speakers
4
LFE Crossover 
Frequency 
Adjusts the cut-off frequency (20~250Hz) for LFE (low-
frequency effects) signals. Xonar DG SI will filter out the 
bass signals below the crossover frequency from small 
speaker channels and forward them to the subwoofer. The 
higher the crossover frequency, the more bass signals will be 
subtracted.
2
4
1
3