ASUS RS700-E7/RS4-C User Manual

6-6

Chapter 6: RAID configuration

3.  Select all the drives required for the RAID set, and then press <F10> to 

configure array setting.

4.  Press <Space> to select the configurable array.

2.  The ARRAY SELECTION MENU displays the available drives connected to 

the SATA ports. Use the up/down arrow key to select the drives you want to 

include in the RAID set, and then press <Space>. When selected, the drive 

indicator changes from READY

 

to ONLIN A[X]-[Y], where X is the array 

number, and Y is the drive number.

•  The information of the selected hard disk drive displays at the bottom of the 

screen.

•  You need at least two identical hard disk drives when creating a RAID 1 set.
•  You need at least four identical hard disk drives when creating a RAID 10 

set.