QLogic 7104-2M-CABLE User Manual
IB0056101-00 H
C-1
C
Configuration Files
contains descriptions of the configuration and configuration template
files used by the InfiniPath and OpenFabrics software.
Table C-1. Configuration Files
Configuration File Name
Description
/etc/infiniband/qlgc_vnic.cfg
VirtualNIC configuration file. Create this file
after running ib_qlgc_vnic_query to
after running ib_qlgc_vnic_query to
get the information you need. This file was
named /etc/infini-
band/qlogic_vnic.cfg or
/etc/sysconfig/ics_inic.cfg in
named /etc/infini-
band/qlogic_vnic.cfg or
/etc/sysconfig/ics_inic.cfg in
previous releases. See the sample file
qlgc_vnic.cfg.sample (described
qlgc_vnic.cfg.sample (described
below) to see how it should be set up.
/etc/modprobe.conf
Specifies options for modules when added
or removed by the modprobe command.
or removed by the modprobe command.
Also used for creating aliases. The PAT
WC option is set here.
For Red Hat systems.
WC option is set here.
For Red Hat systems.
/etc/modprobe.conf.local
Specifies options for modules when added
or removed by the modprobe command.
or removed by the modprobe command.
Also used for creating aliases. PAT
write-combing option is set here.
For SLES systems.
write-combing option is set here.
For SLES systems.
/etc/infiniband/openib.conf
The primary configuration file for Infini-
Path, OFED modules, and other modules
and associated daemons. Automatically
loads additional modules or changes IPoIB
transport type.
Path, OFED modules, and other modules
and associated daemons. Automatically
loads additional modules or changes IPoIB
transport type.
/etc/sysconfig/infinipath
Contains settings, including the one that
sets the ipath_mtrr script to run on
sets the ipath_mtrr script to run on
reboot.