ASUS ESC4000 User Manual

3-3

ASUS ESC4000 Series

To attach the rack rails
1.  Place the two front rail rack joints into the rear rail rack slots, as shown in the 

following figure.

2.  Attach the front and rear rail racks with eight screws and nuts, as shown in 

the following figure. Do not secure the screws too tight so that you can still 

adjust the length of the rack rails to meet the depth of the server rack.

7.  Secure the front end of the rail with 

two rack screws, as shown in the 

right figure.

8.  Secure the rear end of the rail with 

two rack screws, as shown in the 

right figure.

9.  Fasten the eight screw you secure 

in step 2, as shown in the right 

figure.

10.  Repeat steps 6 to 9 to assemble 

and attach the rack rail on the other 

side.

3.  Select two units of space (2U) on the rack where you want to install the 

barebone server.

4.  Measure the depth of the rack to determine the length of the rack rails.
5.  Adjust the rack rail to ensure that it fits the rack.
6.  Position the rack rail to the 2U space on the rack. Ensure that the front end of 

the rack rail goes to the front of the rack space.