ASUS ESC4000 User Manual

ASUS ESC4000 Series

5-9

5.3.3

SATA1–6

The BIOS automatically detects the connected IDE devices. There is a separate

sub-menu for each IDE device. Select a device item, then press <Enter> to display

the IDE device information.

The BIOS automatically detects the values opposite the dimmed items (Device,

Vendor, Size, LBA Mode, Block Mode, PIO Mode, Async DMA, Ultra DMA, and

S.M.A.R.T. monitoring). These values are not user-configurable. These items show

N/A if no IDE device is installed in the system.

LBA/Large Mode [Auto]

Enables or disables the LBA mode. Setting to [Auto] enables the LBA mode if the

device supports this mode, and if the device was not previously formatted with LBA

mode disabled. Configuration options: [Disabled] [Auto]

Block (Multi-Sector Transfer) M [Auto]

Enables or disables data multi-sectors transfers. When set to [Auto], the data

transfer from and to the device occurs multiple sectors at a time if the device

supports multi-sector transfer feature. When set to [Disabled], the data transfer

from and to the device occurs one sector at a time.

Configuration options: [Disabled] [Auto]

PIO Mode [Auto]

Allows you to select the data transfer mode.

Configuration options: [Auto] [0] [1] [2] [3] [4]

BIOS SETUP UTILITY

Main

SATA 1

Device :Hard Disk

Vendor :WDC WD1002FBYS-01A6B0

Size :1.0TB

LBA Mode :Supported

Block Mode:16Sectors

PIO Mode :4

Async DMA :MultiWord DMA-2

Ultra DMA :Ultra DMA-5

S.M.A.R.T.:Supported

LBA/Large Mode

[Auto]

Block(Multi-Sector Transfer)M [Auto]

PIO Mode

[Auto]

DMA Mode

[Auto]

SMART Monitoring

[Auto]

32Bit Data Transfer

[Enabled]

←→

Select Screen

↑↓

Select Item

+- Change Option

F1 General Help

F10 Save and Exit

ESC Exit

Select the type

of device connected

to the system.

The PATA device is for ODD (optical disk drive) only.