QLogic 7104-10M-CABLE User Manual
4–Hardware Installation
Unpacking Information
Unpacking Information
4-8
IB0056101-00 H
S
Figure 4-3. QLogic QHT7040/QHT7140 Full and Low Profile Cards with Riser, Top
View
Unpacking the QLogic Adapter
Follow these steps when unpacking the QLogic adapter:
1.
When unpacking, ground yourself before removing the QLogic adapter from
the anti-static bag.
the anti-static bag.
2.
Grasping the QLogic adapter by its face plate, pull the adapter out of the
anti-static bag. Handle the adapter only by its edges or the face plate. Do not
allow the adapter or any of its components to touch any metal parts.
anti-static bag. Handle the adapter only by its edges or the face plate. Do not
allow the adapter or any of its components to touch any metal parts.
3.
After checking for visual damage, store the adapter and the riser card in their
anti-static bags until you are ready to install them.
anti-static bags until you are ready to install them.
PathScale
PathScale
HTX Riser Card
InfiniBand
Connector
Connector
QHT7040 Full Height
Short Card
Face Plate
IBA6110 ASIC
HTX Edge
Connectors
InfiniBand
Connector
Connector
Face Plate
QHT7140 Low
Profile Card