IMC Networks iMcV-S2MM/1250, LX-SM1310-SC + SX-MM850-SC 859-14799 Leaflet
Product codes
859-14799
800-624-1070
www.imcnetworks.com
M
edia
C
onversion
Features and Benefits
Cost-effective and flexible
• Use multi-mode fiber equipment and
implement single-mode fiber only where
longer distances are needed
Protocol-Independent
• Modules support various transmission
speeds— from 10 Mbps Ethernet up to
Gigabit Ethernet
Meets a multitude of installation
requirements
• Available with ST, SC or Small Form
Factor fiber connectors
• Single-strand fiber versions available
• CWDM fiber versions available
• Supports very long fiber distances
Easy to configure and manage with
GUI-based iView²
• Up and running in less than 5 minutes
• Receive vital traffic and health
information, as well as traps if problems
should occur
Maximizes network uptime
• Modules are hot-swappable; no need to
power-down chassis when upgrading or
trouble-shooting a single module
Protocol-Independent, SNMP-Manageable Fiber Mode Conversion Modules
iMcV Fiber Mode Converter
The iMcV Series of fiber mode
conversion modules allow you
to easily extend your network to
remote locations by converting
multi-mode fiber to single-mode
fiber.
conversion modules allow you
to easily extend your network to
remote locations by converting
multi-mode fiber to single-mode
fiber.
In today’s dynamic networks, changing requirements are a fact of
life. The multi-mode fiber products and cabling which were the
most cost-effective and sound choice for your network yesterday
may no longer give you the flexibility you require when adding
remote offices today. Easily overcome the distance limitations
inherent to multi-mode fiber by converting to single-mode fiber.
Fiber mode converters are the solution.
Extend the reach of your network without replacing
multi-mode fiber equipment:
As an economical alternative to using a switch with single-mode
fiber ports, simply install an IMC Networks fiber mode converter
into your multi-mode fiber network. This enables you to easily
connect to single-mode cabling and achieve distances up to 100 km.
Our fiber mode converters also give you the flexibility to add
single-mode fiber links only where needed. The iMcV series of
fiber mode conversion modules includes:
iMcV-S2MM:
• Converts multi-mode to single-mode fiber
• Supports 10 Mbps Ethernet to 155 Mbps ATM (OC-3);
622 Mbps; and from 622 Mbps to 1.25 Gbps Gigabit Ethernet
iMcV-M2MM:
• Converts multi-mode to multi-mode fiber
• 10 Mbps Ethernet to 155 Mbps ATM (OC-3)
iMcV-S2SM:
• Converts single-mode to single-mode fiber
• Supports 10 Mbps Ethernet to 155 Mbps ATM (OC-3); and
from 622 Mbps to 1.25 Gbps Gigabit Ethernet
Hot-swappable fiber mode conversion modules significantly reduce
operation costs by allowing other modules within the same chassis
to remain up and running during product upgrades, maintenance
and troubleshooting.
RoHS
Compliant