ASUS GP-108 Quick Setup Guide

CA10727 / First Edition / August 2015

NOTE: Contact your dealer or retailer if any of the items is damaged or missing.

a.   Connect one end of the power cable to GP-108 and the other end to a power outlet. The power LED 

and system LED turn to solid green.

b.   Connect your devices to PoE ports 1~8 with RJ-45 cables. The switch automatically provides power to 

802.3at/af-compliant PoE devices.

c.   Insert an RJ-45 cable to the Gigabit port of the GP-108 to connect it to your existing network  (via 

modem, router, hub, or access point).

•

ASUS PoE switch x 1

•

Power cord x 1

•

Mounting bracket x 2

•

Screw x 8

•

Rubber foot x 4

•

Quick Start Guide x 1

  a.  Peel the adhesive backing paper from the four rubber feet.

  b.  Attach the rubber feet to the four recessed areas on bottom of 

GP-108.

  c.  Place the GP-108 on a flat surface.

GP-108 supplies 30W power per PoE port and a total of 130W power across all four ports. Check the 

status of LEDs on the front panel for the remaining power budget.

 

LED Descriptions

Color

Status

Power LED

Solid Green

Power on

System LED

Solid Green

System OK

Solid Amber

Running Power-On-Self-Test

Blinking Amber PoE failed

PoE Power Budget

Solid Green

32.5W to 130W PoE power budget remaining.

Solid Amber

15.4W to 32.5W PoE power budget remaining.

Blinking Amber Less than 15.4W PoE power budget remaining. 

Left LED for Ethernet 

port: Link/Act

Solid/Blinking 

Green

Link established at 1000 Mbps. The LED blinks when 

transmitting and receiving data.

Solid/Blinking 

Amber

Link established at 10/100 Mbps. The LED blinks when 

transmitting and receiving data.

Right LED for Ethernet 

port: PoE status

Solid Green

The PoE power output is less than 15.4W

Solid Amber

The PoE power output is greater than 15.4W but less than 30W

Amber Blinking The PoE power output is requested over 30W

  a.    Before installation, ensure that the rack is stable.

NOTE: GP-108 is compatible with the standard 19" EIA racks.

 b. 

Attach the mounting brackets to the GP-108 with the screws that came with the package.

  c.  Secure the brackets to the rack with suitable screws, which are not included in the package.

Wi-Fi Access Point

IP cam

VoIPs

Internet

10/100/1000 base-T 

LAN

Port 1-8 comply with:

1. IEEE 802.3

2. IEEE 802.3u

3. IEEE 802.3ab

4. IEEE 802.3az

5.  Support Half/Full-Duplex 

operations

6. Auto-negotiation

7. Auto MDI/MDIX

8.  Supports IEEE 802.3x Flow 

Control support for Full-Duplex 

mode

PoE Standard 

IEEE 802.3af/at

Maximum PoE Power 

Supply

130W

Maximum PoE Power 

Supply Per Port

30W

Gigabit Port

8

PoE Port

8

Switching Capability

16 Gbps

MAC Address table size

8K

Packet Buffer memory

2M bit

Wire speed on all ports and 

port options  

Full-wire speed (full-duplex) 

operation on all GE ports

Priority Queue

8 queues

Forwarding Mode

Store and Forward

AC Input 

100V ~ 240V, 50/60Hz

DC Output  

55V, 3.72A 

Dimension

180mm x 230mm x 44 mm 

(7" x 9" x 1.7")

Weight  

1499g (3.30 lbs)

Operating Temperature

0°c - 40°c (32°f - 104°f)

Operation Humidity

20~ 80%, non-condensing

NA10727_GP-108_QSG.indd   1

2015-08-27   16:07:57