ASUS GP-105 Quick Setup Guide

Q10693 / First Edition / July 2015

NOTE: Contact your dealer or retailer if any of the items is damaged or missing.

a.   Connect one end of the power cable to GP-105 and the other end to a power outlet. The power LED 

and system LED turn to solid green.

b.   Connect your devices to PoE ports 1~4 with RJ-45 cables. The switch automatically provides power to 

802.3at/af-compliant PoE devices.

c.   Insert an RJ-45 cable to the Gigabit port of the GP-105 to connect it to your existing network  (via 

modem, router, hub, or access point).

•

ASUS PoE switch x 1

•

Power cord x 1

•

Mounting bracket x 2

•

Screw x 8

•

Rubber foot x 4

•

Quick Start Guide x 1

  a.  Peel the adhesive backing paper from the four rubber feet.

  b.  Attach the rubber feet to the four recessed areas on bottom of

GP-105.

  c.  Place the GP-105 on a flat surface.

GP-105 supplies 30W power per PoE port and a total of 80W power across all four ports. Check the 

status of LEDs on the front panel for the remaining power budget.

 

LED Descriptions

Color

Status

Power LED

Solid Green

Power on

System LED

Solid Green

System OK

Solid Amber

Running Power-On-Self-Test

Blinking Amber PoE failed 

PoE Power Budget

Solid Green

20W to 80W PoE power budget remaining.

Solid Amber

15.4W to 20W PoE power budget remaining.

Blinking Amber Less than 15.4W PoE power budget remaining. 

Left LED for Gigabit 

port 1–5: Link/Act

Solid/Blinking

Green

Link established at 1000 Mbps. The LED blinks when 

transmitting and receiving data.

Solid/Blinking

Amber

Link established at 10/100 Mbps. The LED blinks when 

transmitting and receiving data.

Right LED for Gigabit 

port 1-4: PoE status

Solid Green

The PoE power output is less than 15.4W

Solid Amber

The PoE power output is greater than 15.4W but less than 30W

Amber Blinking The PoE power output is requested over 30W

  a.    Before installation, ensure that the rack is stable.

NOTE: GP-105 is compatible with the standard 19" EIA racks.

 b. 

Attach the mounting brackets to the GP-105 with the screws that came with the package.

 c.  Secure the brackets to the rack with suitable screws, which are not included in the package.

Wi-Fi Access Point

IP cam

VoIPs

Internet

10/100/1000 base-T 

LAN

Port 1-5 comply with:

1. IEEE 802.3

2. IEEE 802.3u

3. IEEE 802.3ab

4. IEEE 802.3az

5. Support Half/Full-Duplex

operations

6. Auto-negotiation

7. Auto MDI/MDIX

8. Supports IEEE 802.3x Flow

Control (Full-Duplex mode)

PoE Standard

IEEE 802.3af/at

Maximum PoE Power 

Supply

80W

Maximum PoE Power 

Supply Per Port

30W

Gigabit Port

5 (port 1-5)

PoE Port

4 (port 1-4)

Switching Capability

10 Gbps

MAC Address table size

2K

Packet Buffer memory

1M bit

Wire speed on all ports and 

port options  

Full-wire speed (full-duplex) 

operation on all GE ports

Priority Queue

8 queues

Forwarding Mode

Store and Forward

AC Input

100V ~ 240V, 50/60Hz

DC Output

54V, 2A

Dimension

180mm x 230mm x 44 mm 

(7" x 9" x 1.7")

Weight  

840 g (1.85 lbs)

Operating Temperature

0°c - 40°c (32°f - 104°f)

Operation Humidity

20~ 80%, non-condensing

NA10693_GP-105_QSG.indd   1

2015-08-27   13:47:38