QLogic 7104-1M-CABLE User Manual

5–Software Installation
Install QLogic OFED User-level Software with the rpm Command

5-18

IB0056101-00  H

S

OpenFabrics-Devel/
OpenFabrics-Devel/32bit/
OpenFabrics-Devel-Static/
OpenFabrics-Debuginfo/
OpenFabrics-Debuginfo/32bit/
OpenSM/
OpenSM/32bit/
OpenSM-Debuginfo/
OpenSM-Debuginfo/32bit/
OpenSM-Devel/
OpenSM-Devel/32bit/
OpenSM-Static/
OpenSM-Static/32bit/
OtherHCAs/
OtherHCAs-Debuginfo
OtherHCAs-Debuginfo/32bit/
OtherHCAs-Devel/
OtherHCAs-Devel/32bit/
OtherHCAs-Devel-Static/
OtherHCAs-Devel-Static/32bit/
OtherMPIs/

The QLogic user-level software is for installation over OFED 1.4 supplied from 
OpenFabrics or with Linux distribution.

For convenience, QLogic recommends that all RPMs are installed on all nodes. 
The infinipath RPM must be installed on all nodes where you install the 
mpi-frontend RPM.
1.

From the QLogic web site (

), click the Downloads tab. 

Locate your adapter model.

2.

After downloading the appropriate tar file, type:

$ tar zxvf 
InfiniPath<version>-<date>-<distribution>-x86_64.tgz

The tar command creates a directory based on the 

tar

 file name and 

places the RPMs and other files in this directory.

3.

The RPMs must be available on each node on which they will be used. Copy 
the RPMs to a directory on each node that will need them.