ASUS 970 PRO GAMING/AURA User Manual

Page of 76
ASUS 970 PRO GAMING/AURA
2-15
EPU Power Saving Mode [Disabled]
The ASUS EPU (Energy Processing Unit) sets the CPU in its minimum power consumption 
settings. Enable this item to set lower CPU core/cache voltage and achieve the best energy 
saving condition.
Configuration options: [Disabled] [Enabled]
The following item appears only when you set EPU Power Saving Mode to [Enabled].
EPU Setting [Auto]
This item allows you to set power saving mode. Configuration options: [Auto] [Light 
Power Saving Mode] [Medium Power Saving Mode] [Max Power Saving Mode]
OC Tuner [CANCEL]
OC Tuner utility automatically overclocks the frequency and voltage of the CPU and DRAM. 
Press <Enter> to start auto tuning. It takes around five minutes, and the system will reboot for 
several times until auto tuning is completed.
Configuration options: [OK] [Cancel]
The configuration options for the following sub‑items vary depending on the CPU/DIMMs 
you install on the motherboard.
DRAM Timing Control
The sub‑items in this menu allow you to set the DRAM timing control features. Use the 
<+> and <‑> keys to adjust the value. To restore the default setting, type [auto] using the 
keyboard and press <Enter>.
Changing the values in this menu may cause the system to become unstable! If this 
happens, revert to the default settings.
DRAM Driving Control
The sub‑items in this menu allow you to set the DRAM driving control features. Use the 
<+> and <‑> keys to adjust the value. To restore the default setting, type [auto] using the 
keyboard and press <Enter>.
Changing the values in this menu may cause the system to become unstable! If this 
happens, revert to the default settings.
DIGI+ Power Control
CPU Load-Line Calibration [Auto]
Load‑line is defined by AMD VRM spec and affects CPU voltage. The CPU working 
voltage will decrease proportionally to CPU loading. Higher value gets a higher voltage 
and better overclocking performance, but increases the CPU and VRM thermal. This 
item allows you to enable or disable the CPU Load‑Line Calibration function.
Configuration options: [Auto] [Regular] [Medium] [High] [Ultra High] [Extreme]