ASUS Z10PE-D16 WS User Guide

2-30

Chapter 2: Hardware information

RAID selection jumper setting (3-pin RAID_SEL1)
This  jumper  allows  you  to  select  the  PCH  SATA  RAID  mode  to  use  LSI  MegaRAID

software or Intel

®

 Rapid  Storage  Technology  enterprise  3.0  RAID.  Place  the  jumper

caps over pins 1–2 if you want to use the LSI MegaRAID software RAID Utility (default);

otherwise, place the jumper caps to pins 2–3 to use the Intel

®

Rapid Storage Technology

Enterprise Option ROM Utility.

ME firmware force recovery setting (3-pin ME_RCVR1)
This jumper allows you to force Intel Management Engine (ME) boot from recovery mode

when ME become corrupted.