Nikon KeyMission 360 Quick Setup Guide
28
Using the Camera
3
Adjust the camera angle.
• Loosen the plate lock (1), set the camera angle
(2), and then tighten the lock (3).
4
Make sure that there are no foreign substances on the surface to
which the base mount will be attached.
which the base mount will be attached.
• If there are foreign substances such as dust or water, remove them.
5
Peel off the release liner from the back of the base mount, and
firmly press the base mount so that the entire surface is
attached.
firmly press the base mount so that the entire surface is
attached.