Nikon KeyMission 360 Reference Manual
16
Attaching the Silicone Jacket
We recommend attaching the silicone jacket to soften physical impacts to the
camera.
Attach by inserting the camera from the side of the silicone jacket so that the Nikon
logos of the camera and silicone jacket overlap.
camera.
Attach by inserting the camera from the side of the silicone jacket so that the Nikon
logos of the camera and silicone jacket overlap.
• If the Nikon logos do not overlap, the silicone jacket may appear in the images.
• When using the camera underwater, remove the silicone jacket because it may
shift out of place and appear in the images.
B
Notes About the Silicone Jacket
• The silicone jacket is made of silicone. Cracking may occur from areas that are damaged.
• The silicone jacket may stretch or break if subjected to excessive force.
• Do not store in locations exposed to direct sunlight or high temperatures or humidity.
• Wash in fresh water only.
• Do not clean with hard brushes or with alcohol, thinner, or other volatile substances.
• This silicone jacket cannot completely protect the camera or lenses from falls or other
• The silicone jacket may stretch or break if subjected to excessive force.
• Do not store in locations exposed to direct sunlight or high temperatures or humidity.
• Wash in fresh water only.
• Do not clean with hard brushes or with alcohol, thinner, or other volatile substances.
• This silicone jacket cannot completely protect the camera or lenses from falls or other
physical shocks.
Attaching the Silicone Jacket