Canon imagePROGRAF iPF770 Manual

To enable automatic cutting, click Yes in the 

Automatic Cutting list. If you prefer to cut the paper later your-

self, click Print Cut Guideline.

Click OK to close the Roll Paper Options dialog box.

Confirm the print settings and print as desired.

Note

Roll paper will be automatically cut after printing.

This topic describes how to cut roll paper automatically after printing (using the auto cut function), as well as how to
print a cut line for manual cutting.

Note

The auto cut function is activated on the printer by default and when the printer driver is installed. Follow the steps
below to reactivate the function if it is disabled, or to select the setting for printing a cut line instead.

 

Choose Page Setup from the application menu to dis-
play the Page Attributes dialog box.

Note

Page Setup might not be displayed in the menu de-
pending on the OS you are using and the application
software.
In this case, select Print from the menu in the applica-
tion software, and configure the settings in the upper
part of the printer driver screen that is displayed.

 

Select the printer in the 

Format for list.

Choose the original size in the 

Paper Size list.

Click 

OK to close the dialog box.

Choose Print in the application menu.

 

iPF770

                                                                                                                                                                       

Cutting Roll Paper After Printing (Mac OS)

                                                                                                                                                                                                                             

Enhanced Printing Options

Other useful settings

151