Canon imagePROGRAF iPF770 Manual
Paper cutting (to have the roll cut at your specified position)
1
Press the Feed button.
2
Press the ▼ button to advance the roll to the position for cutting.
3
Press the Cut button.
4
Press ▲ or ▼ to select Yes, and then press the OK button.
After the roll paper is cut, it is rewound automatically.
After the roll paper is cut, it is rewound automatically.
Caution
•
If paper would be short when cut at a particular position, the roll may automatically be advanced in some
cases before cutting.
cases before cutting.
Cutting the Leading Edge of Roll Paper Automatically
Cutting the Leading Edge of Roll Paper Automatically
If the leading edge of the paper is cut crooked or is not cut straight when roll paper is loaded, it will not print correctly. If
this happens, you can cut the leading edge of the paper straight when loading a paper roll by using Trim Edge First in
the Control Panel menu.
Trim Edge First offers the following options.
this happens, you can cut the leading edge of the paper straight when loading a paper roll by using Trim Edge First in
the Control Panel menu.
Trim Edge First offers the following options.
•
Automatic
If the leading edge of the paper is cut crooked and is not cut straight when loading roll paper, cut the leading edge
straight and eject the fragment of paper to prevent printing on the platen and soiling the printer.
If the leading edge of the paper is cut crooked and is not cut straight when loading roll paper, cut the leading edge
straight and eject the fragment of paper to prevent printing on the platen and soiling the printer.
Cutting the Leading Edge of Roll Paper Automatically
iPF770
Handling and Use of Paper
Handling rolls
372