Canon imagePROGRAF iPF770 Manual
4
Fold an A4 sheet lengthwise four times and insert it
through the gap of the Paper Feed Slot. Push the
scrap out toward the Platen.
through the gap of the Paper Feed Slot. Push the
scrap out toward the Platen.
5
Remove the scrap when it is pushed out onto the Platen.
6
If any scraps remain inside the paper feed slot, repeat steps 4 and 5.
7
Holding it at the positions indicated, close the Roll
Cover.
Cover.
8
Pull the Release Lever forward.
Roll paper cannot be inserted into the Paper Feed Slot
Roll paper cannot be inserted into the Paper Feed Slot
Cause
Corrective Action
The roll paper is warped.
Straighten out curls and reload the roll.
Paper is jammed by the paper feed slot.
Remove the jammed paper.
The paper source selection is incorrect.
Press the Load button and select the paper source.
a
Roll paper cannot be inserted into the Paper Feed Slot
iPF770 Series
Troubleshooting
Problems Regarding Paper
90