Canon imagePRESS C800/C700 Manual
Remove in the standard stacker / stapler the punch waste
The dashboard of the control panel indicates if the punch waste tray is full. The print system
cannot punch when the punch waste tray is full. This instruction only describes the removal of
punch waste of the stacker/stapler. Refer to the user manual of the professional puncher how to
remove punch waste from the professional puncher.
cannot punch when the punch waste tray is full. This instruction only describes the removal of
punch waste of the stacker/stapler. Refer to the user manual of the professional puncher how to
remove punch waste from the professional puncher.
[118] Location of the punch waste tray
IMPORTANT
Be careful when you perform maintenance tasks on optionals attached to the machine. When
you perform a maintenance task, such as replace a staple cartridge, remove waste, or solve
jams, other machine parts can continue with job process activities.
For more information, see:
Procedure
Action
1
Open the front cover of the punch unit (1) and
pull out the punch waste tray (2).
pull out the punch waste tray (2).
2
Discard the punch waste.
IMPORTANT
Make sure that the punch waste tray
is completely emptied.
is completely emptied.
3
Return the punch waste tray back to its original
position (1) and close the front cover of the
punch unit (2).
position (1) and close the front cover of the
punch unit (2).
CAUTION
When you close the front cover of
the punch unit, be careful not to get
your fingers caught. This can cause
personal injury.
the punch unit, be careful not to get
your fingers caught. This can cause
personal injury.
Remove in the standard stacker / stapler the punch waste
210
Chapter 10 - Maintain the print system
imagePRESS C800 Series