Canon imagePROGRAF iPF830 Manual

3-Inch Paper Core Attachment #2 ( Holder Stopper side)

2-Inch Paper Core Attachment

Important

Store the roll in the original bag or box, away from high temperature, humidity, and direct sunlight. If paper is not
stored properly, the printing surface may become scratched, which may affect the printing quality when you use it
again.

After a roll has been advanced, you can press the Feed button to feed or retract the roll with the ▲ and ▼ buttons.

Press the Feed button.

Press the ▲ or ▼ button to advance or retract the roll.
Press ▲ to retract the roll manually.
Press ▼ to advance the roll manually.

Note

If you hold down ▲ or ▼ for less than a second, the roll will move about 1 mm (0.04 in).
If you hold down ▲ or ▼ for more than a second, the roll will move until you release the button. Release the button
when the Display Screen indicates "End of paper feed. Cannot feed paper more.".

Paper can be fed even when the Stacker is attached. However, if paper is left for some period of time caught in the
Stacker, the Stacker will stop. If this happens, first remove the paper from the Stacker and then turn the Stacker
power off and then on again.

a

 

a

 

iPF850

                                                                                                                                                                                   

Feeding Roll Paper Manually

                                                                                                                                                                                                                      

Handling and Use of Paper

Handling rolls

357