Canon imageCLASS MF7470 Manual
1
2
3
4
5
6
7
8
9
10
11
7-16
Previous
Back
Next
TOP
Before Using the
Machine
Machine
Original and Paper
Copying
Sending and
Receiving
Receiving
Printing and
Scanning
Scanning
Network (imageCLASS
MF7480/MF7470 Only)
MF7480/MF7470 Only)
Remote UI (imageCLASS
MF7480/MF7470 Only)
MF7480/MF7470 Only)
System Settings
Maintenance
Troubleshooting
Appendix
Index
Table of Contents
Specifying Forwarding Settings
The Remote UI enables you to automatically forward received
documents to specified addresses. To use this function, you
need to specify the forwarding settings in two ways, and
depending on the settings the function will work differently:
documents to specified addresses. To use this function, you
need to specify the forwarding settings in two ways, and
depending on the settings the function will work differently:
Forwarding conditions are set: the machine will forward only
documents that meet specified conditions.
documents that meet specified conditions.
Forwarding conditions are not set: the machine will forward
all received documents.
all received documents.
[Forwarding Settings] is displayed only when you are in the
Administrator Mode.
You can store 10 forwarding settings with specific conditions.
You can store the forwarding settings without conditions one at a time,
according to the Receive Type of the received document.
You can also access the forwarding settings from the control panel of the
machine. For details, see “Machine Settings,” on p. 11-3.
Administrator Mode.
You can store 10 forwarding settings with specific conditions.
You can store the forwarding settings without conditions one at a time,
according to the Receive Type of the received document.
You can also access the forwarding settings from the control panel of the
machine. For details, see “Machine Settings,” on p. 11-3.
1.
Click
[Add.Func.]
→ [Forwarding Settings] from
the menu that appears under [Add.Func.].
●
●
–
–
–
–
–
To forward only documents that meet specified
forwarding conditions:
forwarding conditions:
Click [
] (Add New Conditions).
●