Canon imageCLASS MF7470 Manual
1
2
3
4
5
6
7
8
9
10
11
9-2
Previous
Back
Next
TOP
Before Using the
Machine
Machine
Original and Paper
Copying
Sending and
Receiving
Receiving
Printing and
Scanning
Scanning
Network (imageCLASS
MF7480/MF7470 Only)
MF7480/MF7470 Only)
Remote UI (imageCLASS
MF7480/MF7470 Only)
MF7480/MF7470 Only)
System Settings
Maintenance
Troubleshooting
Appendix
Index
Table of Contents
Cleaning the Machine
Note the following before cleaning your machine:
Make sure no document is stored in memory, then turn off the
main power switch and disconnect the power cord.
main power switch and disconnect the power cord.
Use a soft cloth to avoid scratching the components.
Do not use tissue paper, paper towels, or similar materials for
cleaning; they can stick to the components or generate static
charges.
cleaning; they can stick to the components or generate static
charges.
Never use volatile liquids such as thinners, benzene, acetone, or any other
chemical cleaner to clean the machine. These can damage the machine
components.
chemical cleaner to clean the machine. These can damage the machine
components.
–
–
–
Exterior
1.
Turn off the main power switch and disconnect
the power cord.
2.
Wipe the machine’s exterior with a clean, soft,
lint-free cloth dampened with water or diluted
dishwashing detergent solution.
dishwashing detergent solution.
3.
Wait for the machine to dry, then reconnect the
power cord and turn on the main power switch.
■