Canon imageCLASS MF7470 Manual

1-8

This section explains how to turn on the main power.

Do not connect or disconnect the power cord with wet hands, as this 
may result in electrical shock.

The main power indicator on the control panel lights and the screen 
below is displayed until the machine is ready to scan.

■

When the machine is ready to scan, the screen below is displayed. 
The example shown below is the Copy Basic Features screen.

If the main power indicator does not light, make sure that the 
power cord is firmly inserted into the power outlet.
If the message <Enter the Department ID and Password using 
the numeric keys.> or <Enter the User ID and Password.> appears 
on the touch panel display, enter your registered ID and 
password. (See “Department/User ID Management,” on p. 1-14.)
If you want to turn the main power off, first turn the control 
panel power switch off, and then press the main power switch to 
the “ ” side.
If you turn off the main power, wait at least 10 seconds before 
turning the main power back on.
Do not turn the main power off if you want to be able to send or 
receive fax/I-fax documents. Sending or receiving fax/I-fax 
documents cannot be done when the main power is turned off.
If User ID Management is set to [On], the machine will take 
longer to become ready to scan.
You can set the initial screen (the first screen that appears when 
the machine is turned on) from the Additional Functions screen. 
The initial screen can be the Copy, Send, Scan, or System Monitor 
screen. (See “Common Settings,” on p. 11-5.)
The machine will enter the Sleep mode if the main power switch 
is pressed when the machine’s power is on and a certain type of 
optional equipment is connected.

–

–

–

–

–

–

–

–