Canon imageCLASS MF7470 Manual

2-13

If you are making two-sided prints, select the Two-sided mode. The 
printed paper may crease depending on the moisture absorption 
condition of the paper, and if you copy the two pages as two one-sided 
documents.
When printing on special types of paper, such as heavyweight paper or 
transparencies, be sure to correctly set the paper type, especially if you 
are using heavyweight paper. If the type of paper is not set correctly, it 
could adversely affect the quality of the image. Moreover, the fixing unit 
may become dirty and require a service repair, or the paper could jam.

If you are making prints on labels, transparencies, nonstandard 
paper size stock, or envelopes, load the paper stock into the stack 
bypass.

The paper in the stack bypass is fed prior to the paper in the paper 
drawer.
The recommended envelopes are COM10 (#10), MONARCH, DL, and ISO-
C5. ISO-B5, Using other envelopes may affect the quality of the printout.
When printing from a computer, make sure to set the correct paper size 
in the printer driver. (See the UFR II Driver Guide and the PCL Driver 
Guide.)
Do not load different size/type paper at the same time.
Depending on the type of heavyweight paper you want to load, if you 
load multiple sheets of heavyweight paper into the stack bypass, a paper 
jam may occur. In this case, load only one sheet of heavyweight paper at 
a time.

–

–

■

–

–

–

–
–

If you are printing on envelopes, do not allow more than 10 envelopes 
to accumulate in the output tray. Always empty the output tray once 10 
envelopes have accumulated.
Envelopes may be creased in the printing process.
For high-quality printouts, use paper recommended by Canon.

If the paper size you are going to load into the stack bypass is 
different from the paper size stored in Stack Bypass Standard 
Settings, set Stack Bypass Standard Settings to [Off ] in Common 
Settings (from the Additional Functions screen). (See “Setting Paper 
Size and Type for the Stack Bypass,” on p. 2-19.)

–

–
–