Canon imageCLASS MF7470 Manual

3-5

If you are copying an original with an image that extends all the way to 
the edges onto the same size paper at a copy ratio of 100%, the 
periphery of the original image may be cut off slightly on the copy. For 
more information on how much may be cut off, see “Scanning Area,” on 
p. 2-4.
If you select [Envelope], [Transparency], or [Labels], make sure that you 
do not specify any Finishing modes (Collate or Group).
If Stack Bypass Standard Settings in Common Settings (from the 
Additional Functions screen) is set to [On], and the paper size/type have 
been stored, the selected paper size/type are displayed on the screen. 
(See “Stack Bypass Standard Settings,” on p. 11-7.)

The machine automatically selects the copy paper size.

The Automatic Paper Selection mode is available only if the originals are 
fed from the feeder.
The Automatic Paper Selection mode cannot be used with the Auto 
Zoom or Image Combination mode.
You cannot use the Automatic Paper Selection mode when copying the 
following types of originals. Copy these originals using the Manual Paper 
Selection mode.

Nonstandard size originals
Highly transparent originals, such as transparencies
Originals with an extremely dark background
STMT or STMTR originals that are placed on the platen glass

If Drawer Eligibility For APS/ADS in Common Settings (from the 
Additional Functions screen) is set to [Off ] for a particular paper source, 
you cannot make copies on paper loaded in that paper source in the 
Automatic Paper Selection mode. (See ”Drawer Eligibility For APS/ADS,” 
on p. 11-6.)

–

–

–

■

–

–

–

–
–
–
–

–

When the feeder is closed, the paper source holding that paper size 
is highlighted along with [Auto].