Canon imageCLASS MF7470 Manual

3-15

If you want to rotate the output sheet, press [Rotate] and proceed to 
step 5. Otherwise, press [OK] and skip to step 7.

[Rotate] can be selected only in the following cases:

If the available paper size is selected manually
If the available paper size is loaded in both the horizontal and 
vertical directions
The selected paper source must have Drawer Eligibility For 
APS/ADS in Common Settings (from the Additional Functions 
screen) set to [On] . (See “Drawer Eligibility For APS/ADS,” on 
p. 11-6.)

When you have selected Automatic Paper Selection for the 
Rotate mode, make sure to select a paper size which can be 
rotated. Otherwise, output will not be rotated.
If there is no paper which can be rotated, output will be collated.

■

–

–
–

–

–

–

If the original is placed on the platen glass, follow the instructions 
that appear on the touch panel display. Press   (Start) once for each 
original. When scanning is complete, press [Done].

To cancel this setting, press [Finishing], then press [Cancel].
To cancel all settings and return the machine to the Standard 
mode, press   (Reset).

If you want to rotate the output sheet, press [Rotate] and proceed to 
step 5. Otherwise, skip to step 7.

–
–

■