Canon imageCLASS MF7470 Manual
1
2
3
4
5
6
7
8
9
10
11
3-20
Previous
Back
Next
TOP
Before Using the
Machine
Machine
Original and Paper
Copying
Sending and
Receiving
Receiving
Printing and
Scanning
Scanning
Network (imageCLASS
MF7480/MF7470 Only)
MF7480/MF7470 Only)
Remote UI (imageCLASS
MF7480/MF7470 Only)
MF7480/MF7470 Only)
System Settings
Maintenance
Troubleshooting
Appendix
Index
Table of Contents
6.
Press (Start).
If the original is placed on the platen glass, follow the instructions
that appear on the touch panel display. Press (Start) once for each
original. When scanning is complete, press [Done].
that appear on the touch panel display. Press (Start) once for each
original. When scanning is complete, press [Done].
To cancel this setting, press [2-sided], then [Cancel].
To cancel all settings and return the machine to the Standard
mode, press (Reset).
To cancel all settings and return the machine to the Standard
mode, press (Reset).
2 to 1-Sided
This feature automatically turns over 2-sided originals placed in the
feeder to make one-sided copies on different sheets of paper.
feeder to make one-sided copies on different sheets of paper.
The 2
▶ 1-Sided mode cannot be used with the 2-page Separation or
Image Combination mode.
Make sure to place originals, such as LTRR, horizontally. If these originals
are placed vertically, the back side of the copy is printed upside down.
Make sure to place originals, such as LTRR, horizontally. If these originals
are placed vertically, the back side of the copy is printed upside down.
1.
Press (COPY).
2.
Place your originals into the feeder.
3.
Press
[2-sided].
4.
Press
[2
▶ 1-Sided].
To set the orientation of the originals, press [Option]:
Select the orientation of the originals, then press [Done].
Details of each item are shown below.
Details of each item are shown below.
[Book Type]:
The front and back sides of the original
have the same top-bottom orientation.
have the same top-bottom orientation.
[Calendar
Type]:
Type]:
The front and back sides of the original
have opposite top-bottom orientations.
have opposite top-bottom orientations.
–
–
–
■
–
–
●
–
5.
Press
[OK].
6.
Press (Start).
To cancel this setting, press [2-sided], then [Cancel].
To cancel all settings and return the machine to the Standard
mode, press (Reset).
To cancel all settings and return the machine to the Standard
mode, press (Reset).
Book to 2-Sided
This feature enables you to make 2-sided copies from facing pages,
or from the front and back sides of a page in bound originals, such
as books and magazines.
or from the front and back sides of a page in bound originals, such
as books and magazines.
The Book
▶ 2-Sided mode cannot be used with the 2-page Separation,
Image Combination, Binding Erase, or Different Size Originals mode.
Only LTR paper can be used for Book
Only LTR paper can be used for Book
▶ 2-Sided copying.
If you select [Front/Back 2-sided], the front side of the first two-sided
page and the back side of the last two-sided page are left blank.
Place your original on the platen glass. The Book
page and the back side of the last two-sided page are left blank.
Place your original on the platen glass. The Book
▶ 2-Sided mode cannot
be used when the original is placed in the feeder.
1.
Press (COPY).
2.
Place your original on the platen glass.
3.
Press
[2-sided].
To make copies in the correct page order, begin copying from the
first open page of the book or bound original.
Place your original face down, making sure that its top edge is
aligned with the back edge of the platen glass (by the arrow in the
top left corner).
first open page of the book or bound original.
Place your original face down, making sure that its top edge is
aligned with the back edge of the platen glass (by the arrow in the
top left corner).
4.
Press
[Book
▶ 2-Sided], then press [Next].
–
–
–
■
–
–
–
–
–