Canon imageCLASS MF7470 Manual

3-28

To enter values in millimeters, press [mm].
When entering the value in millimeters, you can also use 

–

 

(numeric keys), and 

 (Clear) to clear your entry.

You can change the value by pressing [-] or [+], even if you have 
entered the value using 

–

 (numeric keys).

If you enter a value outside the setting range, a message 
prompting you to enter an appropriate value appears on the 
screen.
The maximum binding erase width that you can set is <13/16" 
(20 mm)>.

To cancel this setting, press [Special Features] → [Frame Erase] → 
[Cancel].
To cancel all settings and return the machine to the Standard 
mode, press   (Reset).

–
–

–

–

–

–

–

This mode enables you to copy different size originals together.

The Different Size Originals mode cannot be used with the Book 

▶ 2-

Sided, 2-page Separation, Image Combination, or Frame Erase mode.
If the originals are placed in the feeder, make sure that the different size 
originals are of the same weight (paper type).
Align the top edge of the originals with the back edge of the feeder if 
you are placing originals with different widths. (“Width” refers to the 
vertical measurement of the paper from the front of the machine to the 
back of the machine when the paper is placed in the feeder or on the 
platen glass.)
If originals with different widths are placed in the feeder, set the 
differently sized originals in the following combinations. Other 
combinations may damage the originals.

11" x 17" and LGL, 11" x 17" and LTRR, 11" x 17" and STMT, LTR and LGL, 
LTR and LTRR, LTR and STMT

If you place originals with different widths into the feeder, the originals 
may move slightly when fed to the platen glass. As a result, the images 
may be scanned and copied as slanted.
If you specify the Different Size Originals mode with the Automatic Paper 
Selection mode, Auto Orientation is not performed.
If the Different Size Originals mode is set, the scanning speed may be 
slower than normal.
If the Different Size Originals mode is used with the 1 

▶ 2-Sided mode, 

the copies are output as one-sided copies on paper of their respective 
sizes if the originals for the front and back sides of a two-sided copy are 
different in size.

■

–

–

–

–

–

–

–

–

–