Canon imageCLASS MF7470 Manual

3‑23

Copying

① Select [A4], [A4R], [B5], [B5R], [LTR], or 

[LTRR].

② Press [OK].

[Rotate] can be selected only in the 
following cases:

If the available paper size is selected 
manually
If the available paper size is loaded 
in both the horizontal and vertical 
directions
The selected paper source must have 
Drawer Eligibility For APS/ADS in 
Common Settings (from the Additional 
Functions screen) set to [On]. (See 
“Drawer Eligibility For APS/ADS,” on 
p. 12‑7.)

When you have selected Automatic Paper 
Selection for the Rotate mode, make sure 
to select a paper size which can be rotated. 
Otherwise, output will not be rotated.
If there is no paper which can be rotated, 
output will be collated.

–

–

–

–

–

–

If the original is placed on the platen glass, 
follow the instructions that appear on the 
touch panel display. Press   (Start) once for 
each original. When scanning is complete, 
press [Done].

To cancel this setting, press [Finishing], 
then press [Cancel].
To cancel all settings and return the 
machine to the Standard mode, press 

 (Reset).

–

–