Canon imageCLASS MF7470 Manual
Sending Documents
4‑16
Scan Settings
You can specify the scan settings to match the original you are sending.
Selecting a Scan Mode
The machine has three preset scan modes:
B&W 200 x 200 dpi, B&W 300 x 300 dpi, and Color 300 x 300 dpi (for the imageCLASS
MF7480)
200 x 200 dpi (Fine), 200 x 400 dpi (SuperFine), and 400 x 400 dpi (UltraFine) (for the
imageCLASS MF7470/MF7460)
Select the desired mode from the preset scan modes according to the type of original
you are sending.
MF7480)
200 x 200 dpi (Fine), 200 x 400 dpi (SuperFine), and 400 x 400 dpi (UltraFine) (for the
imageCLASS MF7470/MF7460)
Select the desired mode from the preset scan modes according to the type of original
you are sending.
If the destination is a fax number or I‑fax address, the original is always scanned and sent in B&W mode.
If you want to use less memory and make the sending time shorter, use a low‑resolution mode.
In addition to the scan mode, you can store addresses and other send settings in the favorites buttons. (See
“Storing/Editing Favorites Buttons,” on p. 4‑86.)
If you want to use less memory and make the sending time shorter, use a low‑resolution mode.
In addition to the scan mode, you can store addresses and other send settings in the favorites buttons. (See
“Storing/Editing Favorites Buttons,” on p. 4‑86.)
–
–
–
–
–
–
–
1
Press
(SEND).
2
Place your originals.
3
① Specify the destination.
② Press [Scan Settings].
③ Select a scan mode.
For instructions on specifying destinations,
see “Specifying Destinations,” on p. 4‑32.
The following combinations of file format
and preset scan modes are not available.
If you select them, a message asking for
your confirmation to change the file format
appears on the screen when you press
see “Specifying Destinations,” on p. 4‑32.
The following combinations of file format
and preset scan modes are not available.
If you select them, a message asking for
your confirmation to change the file format
appears on the screen when you press
(Start).
[PDF (Compact)] or [JPEG] as the file
format and [B&W 200 x 200 dpi] or [B&W
300 x 300 dpi] as the scan mode.
[TIFF] or [PDF] as the file format and
[Color 300 x 300 dpi] as the scan mode.
format and [B&W 200 x 200 dpi] or [B&W
300 x 300 dpi] as the scan mode.
[TIFF] or [PDF] as the file format and
[Color 300 x 300 dpi] as the scan mode.
[Color 300 x 300 dpi] is not available when
sending faxes or I‑faxes.
To change the Scan mode settings, select
[Option] from the Scan Settings drop‑down
list, and adjust the settings.
sending faxes or I‑faxes.
To change the Scan mode settings, select
[Option] from the Scan Settings drop‑down
list, and adjust the settings.
–
–
–
–
–
–