Canon imageCLASS MF7470 Manual
Sending Documents
4‑28
Two-Sided Originals
You can set the machine to automatically turn over two‑sided originals placed in the feeder,
so as to scan each side separately.
so as to scan each side separately.
When you are scanning originals with a horizontal (landscape) orientation, such as LTRR, make sure to place
them horizontally into the feeder. If these originals are placed vertically, the back sides of these originals are
scanned upside down.
them horizontally into the feeder. If these originals are placed vertically, the back sides of these originals are
scanned upside down.
1
Press
(SEND).
2
Place your originals in the feeder.
3
① Specify the destination.
② Press [Scan Settings].
③ Press [Option].
For instructions on specifying destinations,
see “Specifying Destinations,” on p. 4‑32.
see “Specifying Destinations,” on p. 4‑32.
4
5
① Select the type of original.
[Book Type]: The front and back sides of
the original have the same top‑bottom
orientation.
[Calendar Type]: The front and back sides
of the original have opposite top‑bottom
orientations.
the original have the same top‑bottom
orientation.
[Calendar Type]: The front and back sides
of the original have opposite top‑bottom
orientations.
② Press [OK].
6
7
Press (Start).
Scanning starts.
The scanned data is sent to the specified
destination when scanning is complete.
The scanned data is sent to the specified
destination when scanning is complete.
①
②
①
②