Canon imageCLASS MF7470 Manual
2‑21
Original and Paper
Setting Paper Size and Type for the Stack Bypass
You can set the paper size and type that the stack bypass uses beforehand. This setting is
useful if you always load the same paper size and type into the stack bypass.
useful if you always load the same paper size and type into the stack bypass.
When printing on special types of paper, such as heavyweight paper or transparencies, be sure to correctly set
the paper type, especially if you are using heavyweight paper. If the type of paper is not set correctly, it could
adversely affect the quality of the image. Moreover, the fixing unit may become dirty and require a service
repair, or the paper could jam.
If you are using the stack bypass as a paper source for the Copy function, you must select the stack bypass
when specifying the Drawer Eligibility for APS/ADS setting. (See “Automatic Paper Selection/Automatic
Drawer Switching,” on p. 2‑25.)
the paper type, especially if you are using heavyweight paper. If the type of paper is not set correctly, it could
adversely affect the quality of the image. Moreover, the fixing unit may become dirty and require a service
repair, or the paper could jam.
If you are using the stack bypass as a paper source for the Copy function, you must select the stack bypass
when specifying the Drawer Eligibility for APS/ADS setting. (See “Automatic Paper Selection/Automatic
Drawer Switching,” on p. 2‑25.)
–
–
1
Press (Additional Functions).
2
3
① Press [▼] until [Stack Bypass Standard
Settings] appears.
①
①
4
5
① Press [On].
② Press [Store].
6
Select the desired paper size.
①
②
①
②