Canon PowerShot SX610 HS Red Manual

102

You can reconnect to any previous access points automatically by 
following step 4 in “Using WPS-Compatible Access Points” (

 

●

To connect to a device via an access point, confirm that the target 
device is already connected to the access point, and then follow the 
procedure from step 8 in “Using WPS-Compatible Access Points” 
(

 

●

To switch access points, choose [Switch Network] on the screen 
displayed when you establish a connection, and then either follow 
the procedure in “Using WPS-Compatible Access Points” (

 

●

Press the [

] button to access the 

keyboard, and then enter the password 
(

 

●

Press the [

][

] buttons to choose 

[Next], and then press the [

] button.

 

●

Press the [

][

] buttons to choose 

[Auto], and then press the [

] button.

 

●

To save images to a connected computer, 
follow the procedure from step 8 in 
“Using WPS-Compatible Access Points” 
(

 

●

To determine the access point password, check on the access 
point itself or refer to the user manual.

 

●

Up to 16 access points will be displayed. If no access points are 
detected even after you choose [Refresh] in step 2 to update the 
list, choose [Manual Settings] in step 2 to complete access point 
settings manually. Follow on-screen instructions and enter an 
SSID, security settings, and a password.

 

●

When you use an access point that you have already connected 
to for connecting to another device, [*] is displayed for the 
password in step 3. To use the same password, press the [

][

] 

buttons to choose [Next], and then press the [

] button.