Canon Océ VarioStream 7000 Manual

A29246-X20-X-4-7680 / fa603.fm

199

Strictly observe the following safety directives when cleaning the fuser roller:

If there is toner residue on the fuser roller, the fuser roller must be cleaned. 
Especially if paper has wrapped itself around the fuser roller, toner may be stuck on the 
fuser roller.

Caution
• Clean soft fuser rollers only when they have cooled off, otherwise there is a danger 

of burning. For this reason, allow the open fuser station to cool down for at least 30 
minutes before cleaning the fuser roller.

• The cleaning agent is very flammable. Danger of fire!
• Do not allow developer to get into eyes. In the event of contact with eyes, rinse eyes 

out with plenty of water and seek medical help.

• Do not breathe in the cleaning agent vapors. If you experience unpleasant 

symptoms after inhaling, immediately go into the fresh air and, if necessary, call a 
doctor.

• Keep cleaning materials out of the reach of children and store away from containers 

used for food and drink.

Important
• Do not use hard objects for cleaning, as they may damage the fuser roller.
• Clean the soft fuser roller only with the prescribed cleaning agent (roller cleaner 6-

1508/W1/H).

1.

Power off printing system.

2.

Open the front and side door of the fuser station.

Caution
The components in the fuser station reach a surface temperature of approximately 

Do not touch any parts behind the safety covers identified with the 

 icon.